Bivalent non-human gal-α1-3-gal glycan epitopes in the Fc region of a monoclonal antibody model can be recognized by anti-Gal-α1-3-Gal IgE antibodies.

Monoclonal antibody (mAb) production using non-human cells can introduce non-human glycan epitopes including terminal galactosyl-α1-3-galactose (α1-3-Gal) moieties. Cetuximab is a commercial mAb associated with causing anaphylaxis in some patients due to the binding of endogenous anti-α1-3-Gal IgE to the Fab (containing bi-α1-3-galactosylated glycans) but not to the Fc region (containing mono-α1-3-galactosylated glycans). Despite being low in abundance in typical commercial mAbs, the inherent sensitivity of cell culture conditions on glycosylation profiles, and the development of novel glycoengineering strategies, novel antibody-based modalities, and biosimilars by various manufacturers with varying procedures, necessitates a better understanding of the structural requirements for anti-α1-3-Gal IgE binding to the Fc region. Herein, we synthesized mAb glycoforms with varying degrees and regioisomers of α1-3-galactosylation and tested their binding to two commercial anti-α1-3-Gal human IgE antibodies derived from a human patient with allergies to red meat (comprising α1-3-Gal epitopes), as well as to the FcγRIIIA receptor. Our results demonstrate that unexpectedly, anti-α1-3-Gal human IgE antibodies can bind to Fc glycans, with bi-α1-3-galactosylation being the most important factor, highlighting that their presence in the Fc region may be considered as a potential critical quality attribute, particularly when using novel platforms in mAb-based biotherapeutics.

Tissue-Engineered Disease Modeling of Lymphangioleiomyomatosis Exposes a Therapeutic Vulnerability to HDAC Inhibition.

Lymphangioleiomyomatosis (LAM) is a rare disease involving cystic lung destruction by invasive LAM cells. These cells harbor loss-of-function mutations in TSC2, conferring hyperactive mTORC1 signaling. Here, tissue engineering tools are employed to model LAM and identify new therapeutic candidates. Biomimetic hydrogel culture of LAM cells is found to recapitulate the molecular and phenotypic characteristics of human disease more faithfully than culture on plastic. A 3D drug screen is conducted, identifying histone deacetylase (HDAC) inhibitors as anti-invasive agents that are also selectively cytotoxic toward TSC2-/- cells. The anti-invasive effects of HDAC inhibitors are independent of genotype, while selective cell death is mTORC1-dependent and mediated by apoptosis. Genotype-selective cytotoxicity is seen exclusively in hydrogel culture due to potentiated differential mTORC1 signaling, a feature that is abrogated in cell culture on plastic. Importantly, HDAC inhibitors block invasion and selectively eradicate LAM cells in vivo in zebrafish xenografts. These findings demonstrate that tissue-engineered disease modeling exposes a physiologically relevant therapeutic vulnerability that would be otherwise missed by conventional culture on plastic. This work substantiates HDAC inhibitors as possible therapeutic candidates for the treatment of patients with LAM and requires further study.

Specific location of galactosylation in an afucosylated antiviral monoclonal antibody affects its FcγRIIIA binding affinity.

Monoclonal antibodies (mAbs) comprise an essential type of biologic therapeutics and are used to treat diseases because of their anti-cancer and anti-inflammatory properties, and their ability to protect against respiratory infections. Its production involves post-translational glycosylation, a biosynthetic process that conjugates glycans to proteins, which plays crucial roles in mAb bioactivities including effector functions and pharmacokinetics. These glycans are heterogeneous and have diverse chemical structures whose composition is sensitive to manufacturing conditions, rendering the understanding of how specific glycan structures affect mAb bioactivity challenging. There is a need to delineate the effects of specific glycans on mAb bioactivity to determine whether changes in certain glycosylation profiles (that can occur during manufacturing) will significantly affect product quality. Using enzymatic transglycosylation with chemically-defined N-glycans, we show that galactosylation at a specific location of N-glycans in an afucosylated anti-viral mAb is responsible for FcγRIIIA binding and antibody-dependent cell-mediated cytotoxicity (ADCC) activity. We report a facile method to obtain purified asymmetric mono-galactosylated biantennary complex N-glycans, and their influence on bioactivity upon incorporation into an afucosylated mAb. Using ELISA, surface plasmon resonance and flow cytometry, we show that galactosylation of the α6 antenna, but not the α3 antenna, consistently increases FcγRIIIA binding affinity. We confirm its relevance in an anti-viral model of respiratory syncytial virus (RSV) using an adapted ADCC reporter assay. We further correlate this structure-function relationship to the interaction of the galactose residue of the α6 antenna with the protein backbone using 2D-1H-15N-NMR, which showed that galactosylation of at this location exhibited chemical shift perturbations compared to glycoforms lacking this galactose residue. Our results highlight the importance of identifying and quantifying specific glycan isomers to ensure adequate quality control in batch-to-batch and biosimilar comparisons.

Highly sensitive characterization of non-human glycan structures of monoclonal antibody drugs utilizing tandem mass spectrometry.

Glycosylation is an important attribute of monoclonal antibodies (mAbs) for assessing manufacturing quality. Analysis of non-human glycans containing terminal galactose-α1,3-galactose and N-glycolylneuraminic acid is essential due to the potential immunogenicity and insufficient efficacy caused by mAb expression in non-human mammalian cells. Using parallel sequencing of isobaric glycopeptides and isomeric glycans that were separated by reversed-phase and porous graphitic carbon LC, we report a highly sensitive LC MS/MS method for the comprehensive characterization of low-abundance non-human glycans and their closely related structural isomers. We demonstrate that the straightforward use of high-abundance diagnostic ions and complementary fragments under the positive ionization low-energy collision-induced dissociation is a universal approach to rapidly discriminate branch-linkage structures of biantennary glycans. Our findings reveal the structural diversity of non-human glycans and sulfation of α-galactosylated glycans, providing both an analytical method and candidate structures that could potentially be used in the crucial quality control of therapeutic mAb products.

Unusual ß1-4-galactosidase activity of an α1-6-mannosidase from Xanthomonas manihotis in the processing of branched hybrid and complex glycans.

Mannosidases are a diverse group of glycoside hydrolases that play crucial roles in mannose trimming of oligomannose glycans, glycoconjugates, and glycoproteins involved in numerous cellular processes, such as glycan biosynthesis and metabolism, structure regulation, cellular recognition, and cell-pathogen interactions. Exomannosidases and endomannosidases cleave specific glycosidic bonds of mannoside linkages in glycans and can be used in enzyme-based methods for sequencing of isomeric glycan structures. α1-6-mannosidase from Xanthomonas manihotis is known as a highly specific exoglycosidase that removes unbranched α1-6 linked mannose residues from oligosaccharides. However, we discovered that this α1-6-mannosidase also possesses an unexpected ß1-4-galactosidase activity in the processing of branched hybrid and complex glycans through our use of enzymatic reactions, high performance anion-exchange chromatography, and liquid chromatography mass spectrometric sequencing. Our docking simulation of the α1-6-mannosidase with glycan substrates reveals potential interacting residues in a relatively shallow pocket slightly differing from its homologous enzymes in the glycoside hydrolase 125 family, which may be responsible for the observed higher promiscuity in substrate binding and subsequent terminal glycan hydrolysis. This observation of novel ß1-4-galactosidase activity of the α1-6-mannosidase provides unique insights into its bifunctional activity on the substrate structure-dependent processing of terminal α1-6-mannose of unbranched glycans and terminal ß1-4-galactose of hybrid and complex glycans. The finding thus suggests the dual glycosidase specificity of this α1-6-mannosidase and the need for careful consideration when used for the structural elucidation of glycan isomers.

Selective reversed-phase high-performance liquid chromatography method for the determination of intact SARS-CoV-2 spike protein.

Protein-based vaccines are playing an increasingly important role in the COVID-19 pandemic. As late-stage clinical data are finalized and released, the number of protein-based vaccines expected to enter the market will increase significantly. Most protein-based COVID-19 vaccines are based on the SARS-CoV-2 spike protein (S-protein), which plays a major role in viral attachment to human cells and infection. As a result, in order to develop and manufacture quality vaccines consistently, it is imperative to have access to selective and efficient methods for the bioanalytical assessment of S-protein. In this study, samples of recombinant S-protein (hexS-protein) and commercial S-protein were used to develop a selective reversed-phase HPLC (RP-HPLC) method that enabled elution of the intact S-protein monomer as a single peak on a wide pore, C8-bonded chromatographic column. The S-protein subunits, S1 and S2 subunits, were clearly separated from intact S-protein and identified. The results of this study set the foundation for reversed-phase HPLC method development and analysis for selective and efficient separation of S-protein monomer from its subunits.

Hollow-fiber bioreactor production of extracellular vesicles from human bone marrow mesenchymal stromal cells yields nanovesicles that mirrors the immuno-modulatory antigenic signature of the producer cell.

BACKGROUND: Extracellular vesicles (EVs) produced by human bone marrow-derived mesenchymal stromal cells (hBM-MSCs) are currently investigated for their clinical effectiveness towards immune-mediated diseases. The large amounts of stem cell-derived EVs required for clinical testing suggest that bioreactor production systems may be a more amenable alternative than conventional EV production methods for manufacturing products for therapeutic use in humans. METHODS: To characterize the potential utility of these systems, EVs from four hBM-MSC donors were produced independently using a hollow-fiber bioreactor system under a cGMP-compliant procedure. EVs were harvested and characterized for size, concentration, immunophenotype, and glycan profile at three separate intervals throughout a 25-day period. RESULTS: Bioreactor-inoculated hBM-MSCs maintained high viability and retained their trilineage mesoderm differentiation capability while still expressing MSC-associated markers upon retrieval. EVs collected from the four hBM-MSC donors showed consistency in size and concentration in addition to presenting a consistent surface glycan profile. EV surface immunophenotypic analyses revealed a consistent low immunogenicity profile in addition to the presence of immuno-regulatory CD40 antigen. EV cargo analysis for biomarkers of immune regulation showed a high abundance of immuno-regulatory and angiogenic factors VEGF-A and IL-8. CONCLUSIONS: Significantly, EVs from hBM-MSCs with immuno-regulatory constituents were generated in a large-scale system over a long production period and could be frequently harvested with the same quality and quantity, which will circumvent the challenge for clinical application.

Resolving Isomeric Structures of Native Glycans by Nanoflow Porous Graphitized Carbon Chromatography-Mass Spectrometry.

Characterization of the structural diversity of glycans by liquid chromatography-tandem mass spectrometry (LC-MS/MS) remains an analytical challenge in large-scale glycomics applications because of the presence of heterogeneous composition, ubiquitous isomers, lability of post-translational glycan modifications, and complexity of data interpretation. High-resolution separation of glycan isomers differentiating from positional, linkage, branching, and anomeric structures is often a prerequisite to ensure the comprehensive glycan identification. Here, we developed a straightforward method using self-packed capillary porous graphitic carbon (PGC) columns for nanoflow LC-MS/MS analyses of native glycans released from glycoproteins. The technique enables highly resolved chromatographic separation of over 20 high-mannose glycan isomers in ribonuclease B and a diverse range of hybrid and complex-type sialoglycoforms of fetuin. The distinct structures of anomeric glycans and linkage sialoglycan isomers, α2,3 and α2,6, were identified by the characteristic MS/MS fragment ions. A glycan sequencing strategy utilizing diagnostic ions and complementary fragments specific to branching residues was established to simplify the MS/MS data interpretation of closely related isomeric structures. To promote the PGC-LC-MS/MS-based method for glycome-wide applications, we extended analyses to native sulfoglycans from the egg-propagated and cell culture-derived influenza vaccines and demonstrate the high-resolution separation and structural characterization of underivatized neutral and anionic glycoforms including oligomannosidic glycan anomers, sialoglycan linkage isomers, and regioisomers of afucosylated and fucosylated sulfoglycans containing sulfated-6-GlcNAc and sulfated-4-GalNAc residues.

Benchmarking to the Gold Standard: Hyaluronan-Oxime Hydrogels Recapitulate Xenograft Models with In Vitro Breast Cancer Spheroid Culture.

Many 3D in vitro models induce breast cancer spheroid formation; however, this alone does not recapitulate the complex in vivo phenotype. To effectively screen therapeutics, it is urgently needed to validate in vitro cancer spheroid models against the gold standard of xenografts. A new oxime-crosslinked hyaluronan (HA) hydrogel is designed, manipulating gelation rate and mechanical properties to grow breast cancer spheroids in 3D. This HA-oxime breast cancer model maintains the gene expression profile most similar to that of tumor xenografts based on a pan-cancer gene expression profile (comprising 730 genes) of three different human breast cancer subtypes compared to Matrigel or conventional 2D culture. Differences in gene expression between breast cancer cultures in HA-oxime versus Matrigel or 2D are confirmed for 12 canonical pathways by gene set variation analysis. Importantly, drug response is dependent on the culture method. Breast cancer cells respond better to the Rac inhibitor (EHT-1864) and the PI3K inhibitor (AZD6482) when cultured in HA-oxime versus Matrigel. This study demonstrates the superiority of an HA-based hydrogel as a platform for in vitro breast cancer culture of both primary, patient-derived cells and cell lines, and provides a hydrogel culture model that closely matches that in vivo.

Rationally Designed 3D Hydrogels Model Invasive Lung Diseases Enabling High-Content Drug Screening.

Cell behavior is highly dependent upon microenvironment. Thus, to identify drugs targeting metastatic cancer, screens need to be performed in tissue mimetic substrates that allow cell invasion and matrix remodeling. A novel biomimetic 3D hydrogel platform that enables quantitative analysis of cell invasion and viability at the individual cell level is developed using automated data acquisition methods with an invasive lung disease (lymphangioleiomyomatosis, LAM) characterized by hyperactive mammalian target of rapamycin complex 1 (mTORC1) signaling as a model. To test the lung-mimetic hydrogel platform, a kinase inhibitor screen is performed using tuberous sclerosis complex 2 (TSC2) hypomorphic cells, identifying Cdk2 inhibition as a putative LAM therapeutic. The 3D hydrogels mimic the native niche, enable multiple modes of invasion, and delineate phenotypic differences between healthy and diseased cells, all of which are critical to effective drug screens of highly invasive diseases including lung cancer.

Muscle stem cell intramuscular delivery within hyaluronan methylcellulose improves engraftment efficiency and dispersion.

Adult skeletal muscle tissue harbors the capacity for self-repair due to the presence of tissue resident muscle stem cells (MuSCs). Advances in the area of prospective MuSC isolation demonstrated the potential of cell transplantation therapy as a regenerative medicine strategy to restore strength and long-term regenerative capacity to aged, injured, or diseased skeletal muscle tissue. However, cell loss during ejection, limits to post-injection proliferation, and poor donor cell dispersion distal to the injection site are amongst hurdles to overcome to maximize MuSC transplant impact. Here, we assess a physical blend of hyaluronan and methylcellulose (HAMC) as a bioactive, shear thinning hydrogel cell delivery system to improve MuSC transplantation efficiency. Using in vivo transplantation studies, we found that the HAMC delivery system results in a >45% increase in the number of donor-derived fibers as compared to saline delivery. We demonstrate that increases in donor-derived fibers when using HAMC are attributed to increased MuSC proliferation via a CD44-independent mechanism, preventing injected cell active clearance, and supporting in vivo expansion by delaying differentiation. Furthermore, we observed a significant improvement in donor fiber dispersion when MuSCs were delivered in HAMC. Our study results suggest that HAMC is a promising muscle stem cell delivery vehicle.

Diels-Alder Click-Cross-Linked Hydrogels with Increased Reactivity Enable 3D Cell Encapsulation.

Engineered hydrogels have been extensively used to direct cell function in 3D cell culture models, which are more representative of the native cellular microenvironment than conventional 2D cell culture. Previously, hyaluronan-furan and bis-maleimide polyethylene glycol hydrogels were synthesized via Diels-Alder chemistry at acidic pH, which did not allow encapsulation of viable cells. In order to enable gelation at physiological pH, the reaction kinetics were accelerated by replacing the hyaluronan-furan with the more electron-rich hyaluronan-methylfuran. These new click-cross-linked hydrogels gel faster and at physiological pH, enabling encapsulation of viable cells, as demonstrated with 3D culture of 5 different cancer cell lines. The methylfuran accelerates Diels-Alder cycloaddition yet also increases the retro Diels-Alder reaction. Using computational analysis, we gain insight into the mechanism of the increased Diels-Alder reactivity and uncover that transition state geometry and an unexpected hydrogen-bonding interaction are important contributors to the observed rate enhancement. This cross-linking strategy serves as a platform for bioconjugation and hydrogel synthesis for use in 3D cell culture and tissue engineering.

Photo-immobilized EGF chemical gradients differentially impact breast cancer cell invasion and drug response in defined 3D hydrogels.

Breast cancer cell invasion is influenced by growth factor concentration gradients in the tumor microenvironment. However, studying the influence of growth factor gradients on breast cancer cell invasion is challenging due to both the complexities of in vivo models and the difficulties in recapitulating the tumor microenvironment with defined gradients using in vitro models. A defined hyaluronic acid (HA)-based hydrogel crosslinked with matrix metalloproteinase (MMP) cleavable peptides and modified with multiphoton labile nitrodibenzofuran (NDBF) was synthesized to photochemically immobilize epidermal growth factor (EGF) gradients. We demonstrate that EGF gradients can differentially influence breast cancer cell invasion and drug response in cell lines with different EGF receptor (EGFR) expression levels. Photopatterned EGF gradients increase the invasion of moderate EGFR expressing MDA-MB-231 cells, reduce invasion of high EGFR expressing MDA-MB-468 cells, and have no effect on invasion of low EGFR-expressing MCF-7 cells. We evaluate MDA-MB-231 and MDA-MB-468 cell response to the clinically tested EGFR inhibitor, cetuximab. Interestingly, the cellular response to cetuximab is completely different on the EGF gradient hydrogels: cetuximab decreases MDA-MB-231 cell invasion but increases MDA-MB-468 cell invasion and cell number, thus demonstrating the importance of including cell-microenvironment interactions when evaluating drug targets.

Independently Tuning the Biochemical and Mechanical Properties of 3D Hyaluronan-Based Hydrogels with Oxime and Diels-Alder Chemistry to Culture Breast Cancer Spheroids.

For native breast cancer cell growth to be mimicked in vitro as spheroids, a well-defined matrix that mimics the tumor microenvironment is required. Finding a biomimetic material for 3D cell culture other than Matrigel has challenged the field. Because hyaluronan is naturally abundant in the tumor microenvironment and can be chemically modified, we synthesized a hyaluronan (HA) hydrogel with independently tunable mechanical and chemical properties for 3D culture of breast cancer cells. By modifying HA with distinct bioorthogonal functional groups, its mechanical properties are controlled by chemical cross-linking via oxime ligation, and its biochemical properties are controlled by grafting bioactive peptides via Diels-Alder chemistry. A series of hydrogels were screened in terms of stiffness and peptide composition for cancer spheroid formation. In the optimal hydrogel formulation, the 3D breast cancer spheroids showed decreased drug diffusion into their core and upregulation of cellular multidrug-resistant efflux pumps similar to what is observed in drug-resistant tumors. Our results highlight the potential of these tunable and well-defined gels in drug screening assays.

Human Pluripotent Stem Cell-Derived TSC2-Haploinsufficient Smooth Muscle Cells Recapitulate Features of Lymphangioleiomyomatosis.

Lymphangioleiomyomatosis (LAM) is a progressive destructive neoplasm of the lung associated with inactivating mutations in the TSC1 or TSC2 tumor suppressor genes. Cell or animal models that accurately reflect the pathology of LAM have been challenging to develop. Here, we generated a robust human cell model of LAM by reprogramming TSC2 mutation-bearing fibroblasts from a patient with both tuberous sclerosis complex (TSC) and LAM (TSC-LAM) into induced pluripotent stem cells (iPSC), followed by selection of cells that resemble those found in LAM tumors by unbiased in vivo differentiation. We established expandable cell lines under smooth muscle cell (SMC) growth conditions that retained a patient-specific genomic TSC2+/- mutation and recapitulated the molecular and functional characteristics of pulmonary LAM cells. These include multiple indicators of hyperactive mTORC1 signaling, presence of specific neural crest and SMC markers, expression of VEGF-D and female sex hormone receptors, reduced autophagy, and metabolic reprogramming. Intriguingly, the LAM-like features of these cells suggest that haploinsufficiency at the TSC2 locus contributes to LAM pathology, and demonstrated that iPSC reprogramming and SMC lineage differentiation of somatic patient cells with germline mutations was a viable approach to generate LAM-like cells. The patient-derived SMC lines we have developed thus represent a novel cellular model of LAM that can advance our understanding of disease pathogenesis and develop therapeutic strategies against LAM. Cancer Res; 77(20); 5491-502. ©2017 AACR.

Engineering Cellular Microenvironments with Photo- and Enzymatically Responsive Hydrogels: Toward Biomimetic 3D Cell Culture Models.

Conventional cell culture techniques using 2D polystyrene or glass have provided great insight into key biochemical mechanisms responsible for cellular events such as cell proliferation, differentiation, and cell-cell interactions. However, the physical and chemical properties of 2D culture in vitro are dramatically different than those found in the native cellular microenvironment in vivo. Cells grown on 2D substrates differ significantly from those grown in vivo, and this explains, in part, why many promising drug candidates discovered through in vitro drug screening assays fail when they are translated to in vivo animal or human models. To overcome this obstacle, 3D cell culture using biomimetic hydrogels has emerged as an alternative strategy to recapitulate native cell growth in vitro. Hydrogels, which are water-swollen polymers, can be synthetic or naturally derived. Many methods have been developed to control the physical and chemical properties of the hydrogels to match those found in specific tissues. Compared to 2D culture, cells cultured in 3D gels with the appropriate physicochemical cues can behave more like they naturally do in vivo. While conventional hydrogels involve modifications to the bulk material to mimic the static aspects of the cellular microenvironment, recent progress has focused on using more dynamic hydrogels, the chemical and physical properties of which can be altered with external stimuli to better mimic the dynamics of the native cellular microenvironment found in vivo. In this Account, we describe our progress in designing stimuli-responsive, optically transparent hydrogels that can be used as biomimetic extracellular matrices (ECMs) to study cell differentiation and migration in the context of modeling the nervous system and cancer. Specifically, we developed photosensitive agarose and hyaluronic acid hydrogels that are activated by single or two-photon irradiation for biomolecule immobilization at specific volumes within the 3D hydrogel. By controlling the spatial location of protein immobilization, we created 3D patterns and protein concentration gradients within these gels. We used the latter to study the effect of VEGF-165 concentration gradients on the interactions between endothelial cells and retinal stem cells. Hyaluronic acid (HA) is particularly compelling as it is naturally found in the ECM of many tissues and the tumor microenvironment. We used Diels-Alder click chemistry and cryogelation to alter the chemical and physical properties of these hydrogels. We also designed HA hydrogels to study the invasion of breast cancer cells. HA gels were chemically cross-linked with matrix metalloproteinase (MMP)-degradable peptides that degrade in the presence of cancer cell-secreted MMPs, thus allowing cells to remodel their local microenvironment and invade into HA/MMP-degradable gels.

6-Bromo-7-hydroxy-3-methylcoumarin (mBhc) is an efficient multi-photon labile protecting group for thiol caging and three-dimensional chemical patterning.

The photochemical release of chemical reagents and bioactive molecules provides a useful tool for spatio-temporal control of biological processes. However, achieving this goal requires the development of highly efficient one- and two-photon sensitive photo-cleavable protecting groups. Thiol-containing compounds play critical roles in biological systems and bioengineering applications. While potentially useful for sulfhydryl protection, the 6-bromo-7-hydroxy coumarin-4-ylmethyl (Bhc) group can undergo an undesired photoisomerization reaction upon irradiation that limits its uncaging efficiency. To address this issue, here we describe the development of 6-bromo-7-hydroxy-3-methylcoumarin-4-ylmethyl (mBhc) as an improved group for thiol-protection. One- and two-photon photolysis reactions demonstrate that a peptide containing a mBhc-caged thiol undergoes clean and efficient photo-cleavage upon irradiation without detectable photoisomer production. To test its utility for biological studies, a K-Ras-derived peptide containing an mBhc-protected thiol was prepared by solid phase peptide synthesis using Fmoc-Cys(mBhc)-OH for the introduction of the caged thiol. Irradiation of that peptide using either UV or near IR light in presence of protein farnesyltransferase (PFTase), resulted in generation of the free peptide which was then recognized by the enzyme and became farnesylated. To show the utility of this caging group in biomaterial applications, we covalently modified hydrogels with mBhc-protected cysteamine. Using multi-photon confocal microscopy, highly defined volumes of free thiols were generated inside the hydrogels and visualized via reaction with a sulfhydryl-reactive fluorophore. The simple synthesis of mBhc and its efficient removal by one- and two-photon processes make it an attractive protecting group for thiol caging in a variety of applications.

Combination of a peptide-modified gellan gum hydrogel with cell therapy in a lumbar spinal cord injury animal model.

Spinal Cord Injury (SCI) is a highly incapacitating condition for which there is still no cure. Current clinical approaches are mainly based on palliative care, so there is a need to find possible treatments to SCI. Cellular transplantation is regarded with great expectation due to the therapeutic potential of cells such as Adipose tissue-derived Stromal/Stem Cells (ASCs) or Olfactory Ensheathing Cells (OECs). Both are accessible sources and present positive paracrine and cell-to-cell interactions, previously reported by our group. Additionally, biomaterials such as hydrogels have been applied in SCI repair with promising results. We propose to combine a GRGDS-modified gellan gum hydrogel with ASCs and OECs in order to promote SCI regeneration. In vitro, ASCs and OECs could be co-cultured within GG-GRGDS hydrogels inducing a more robust neurite outgrowth when compared to controls. In vivo experiments in a hemisection SCI rat model revealed that the administration of ASCs and OECs encapsulated in a GG-GRGDS hydrogel led to significant motor improvements when compared to both control (SCI) and hydrogel alone (GG-GRGDS) groups. This was accompanied by a decreased infiltration of inflammatory cells and astrocytes, and by an increased intensity of neurofilament. These results suggest evident gains induced by the encapsulation of ASCs and OECs in GG-GRGDS based hydrogels.

Hybrid Crosslinked Methylcellulose Hydrogel: A Predictable and Tunable Platform for Local Drug Delivery.

Design of experiment is used to develop a hybrid methylcellulose hydrogel that combines physical and chemical crosslinks, resulting in an injectable, in situ stiffening, and long-lasting material with predictable swelling and rheological properties. Chemical crosslinking is complete prior to injection, allowing for ease of use and storage. Controlled release of two relevant protein therapeutics and biocompatibility of the hydrogel are demonstrated.

Innovative use of the taxol binding peptide overcomes key challenges of stable and high drug loading in polymeric nanomicelles.

Despite widespread clinical use, delivery of taxane chemotherapeutics remains a challenge due to poor solubility and lack of selectively. Polymeric nanomicelle strategies have been pursued to overcome these issues; however current formulations are often limited by low drug loading and poor serum stability. To achieve a drug delivery system that addresses these issues, poly(D,L-lactide-co-2-methyl-2-carboxytrimethylene carbonate)-g-poly(ethylene glycol) was covalently modified with the taxol binding peptide ­ a peptide from the ß-tubulin-taxane binding site. This modification resulted in drug loadings five times higher than unmodified polymers, which is significantly higher than typical hydrophobic modifications, including with benzyl and docetaxel functionalization. Unlike many formulations with high drug loading, these nanomicelles were stable in serum for up to 24 h and maintained docetaxel cytotoxicity. By incorporating the taxane binding peptide into the polymer chemistry, a new twist was applied to an old problem, which is broadly applicable to other polymeric micelle systems and drug-peptide combinations in general.